Desain Controller Pada Heating Furnace Berbasis Metode Firefly Algorithm (FA)
DOI:
https://doi.org/10.32492/nucleus.v1i2.1202Keywords:
Firefly Algorithms, PID Controller, Heating FurnaceAbstract
Furnace is an equipment used to heat or change shape. Process control has become increasingly important in industry, as a consequence of global competition, Year after year, furnaces have improved in both process and industrial equipment. The tuning process ensures that system performance meets operating objectives. Artificial Intelligent (AI)-based intelligent control has developed a lot to improve conventional controls to control voltage loads and is always under constant assessment of the variable. In this research task, it will be discussed about the control of the furnace temperature so that it remains constant with PID and by tuning the Firefly Algorithm (FA) with changes in the output voltage obtained which have better settling time, overshoot and undershoot.
References
M. Ali, H. Nurohmah, Budiman, J. Suharsono, H. Suyono, and M. A. Muslim, “Optimization on PID and ANFIS Controller on Dual Axis Tracking for Photovoltaic Based on Firefly Algorithm,” in 2019 International Conference on Electrical, Electronics and Information Engineering (ICEEIE), IEEE, Oct. 2019, pp. 1–5. doi: 10.1109/ICEEIE47180.2019.8981428.
M. Ali et al., “The comparison of dual axis photovoltaic tracking system using artificial intelligence techniques,” IAES Int. J. Artif. Intell., vol. 10, no. 4, p. 901, Dec. 2021, doi: 10.11591/ijai.v10.i4.pp901-909.
M. Ali, Muhlasin, H. Nurohmah, A. Raikhani, H. Sopian, and N. Sutantra, “Combined ANFIS method with FA, PSO, and ICA as Steering Control Optimization on Electric Car,” in 2018 Electrical Power, Electronics, Communications, Controls and Informatics Seminar (EECCIS), IEEE, Oct. 2018, pp. 299–304. doi: 10.1109/EECCIS.2018.8692885.
M. Ali, H. Nurohmah, and D. Ajiatmo, “Rekonfigurasi Jaringan Distribusi Radial 65 Bus Berbasis Binary Particle Swarm Optimization (BPSO),” J. JEETech, vol. 3, no. 1, pp. 57–61, 2022, doi: 10.32492/jeetech.v3i1.3108.
M. Ali, M. R. Djalal, H. Nurohmah, and Rukslin, “Intelligent Optimization Using Craziness Particle Swarm on Permanent Magnet Synchronous Motor,” in 2022 2nd International Seminar on Machine Learning, Optimization, and Data Science (ISMODE), IEEE, Dec. 2022, pp. 579–583. doi: 10.1109/ISMODE56940.2022.10180931.
M. Ali, H. Suyono, M. A. Muslim, M. R. Djalal, Y. M. Safarudin, and A. A. Firdaus, “Determination of the parameters of the firefly method for PID parameters in solar panel applications,” SINERGI, vol. 26, no. 2, p. 265, Jun. 2022, doi: 10.22441/sinergi.2022.2.016.
B. Kadaryono, Kadaryono; Rukslin, Rukslin; Ali, Machrus; Budiman, “Optimasi PID dan SMES pada Mikrohidro Berbasis Firefly Algorithm,” J. Tecnoscienza, vol. 3, no. 1, pp. 65–80, 2018.
M. Ali, “Optimasi Pemograman Sistem Pengendalian Mesin CNC Pengebor PCB Berdasar Metode Firefly Algorithm,” ALINIER J. Artif. Intell. Appl., vol. 3, no. 2, pp. 28–37, 2022, doi: 10.36040/alinier.v3i2.5840.
F. Rizal Anas, D. Ajiatmo, H. Nurohmah, and M. Ali, “Desain PID Controller Pada Temperatur Heating Furnace Menggunakan Metode Firefly Algorithm (FA).,” Nucl. J., vol. 1, no. 2, pp. 70–78, 2022, doi: 10.32492/nucleus.v1i2.1203.
M. A. Haikal, M. Ali, I. Budi S, and F. H. B. Mohd Noh, “Hybrid Method for Optimization of Permanent Magnet Synchronous Machine (PMSM) Rotation using FA-ANFIS,” Front. Energy Syst. Power Eng., vol. 4, no. 2, p. 9, 2022, doi: 10.17977/um049v4i2p09-19.
M. Ali, A. Raikhani, H. Sopian, and I. Umami, “Optimasi Pengaturan Kecepatan Motor Shunt Berbasis Imperalist Competitive Algorithm (ICA),” J. Intake J. Penelit. Ilmu Tek. dan Terap., vol. 9, no. 1, pp. 26–31, Apr. 2020, doi: 10.32492/jintake.v9i1.756.
M. Ali, A. Raikhani, B. Budiman, and H. Sopian, “Algoritma Persaingan Imperialis Sebagai Optimasi Kontroler PID dan ANFIS Pada Mesin Sinkron Magnet Permanen (Imperialist Competitive Algorithm As PID Optimization and ANFIS Controller at Permanent Magnet Synchronous Machine),” JEEE-U (Journal Electr. Electron. Eng., vol. 3, no. 1, p. 57, Apr. 2019, doi: 10.21070/jeee-u.v3i1.2023.
L. Hakim, A. Ghoutsul Fadlili, Kholish; Raikhani, H. Nurohmah, and M. Ali, “Optimasi Load Frequency Control pada Wind-Diesel berbasis Differential Evolution dan Bat Algorithm,” SinarFe7, vol. 1, no. 1, pp. 1–6, 2018.
M. Ali, M. A. Haikal, R. Rukslin, and H. Nurohmah, “Optimisasi Steering Control Pada Mobil Listrik Auto-Pilot Menggunakan Metode Bat Algorithm,” JE-Unisla, vol. 7, no. 1, p. 36, Apr. 2022, doi: 10.30736/je-unisla.v7i1.813.
T. Amujiati, D. Ajiatmo, M. Ali, and Muhlasin, “Desain Kendali Menggunakan Hybrid PID-BA untuk Mengatur Kecepatan Motor Induksi,” SinarFe7, vol. 4, pp. 282–288, 2021, [Online]. Available: https://journal.fortei7.org/index.php/sinarFe7/article/view/114
M. Arrohman, R. Fajardika, M. Muhlasin, and M. Ali, “Optimasi Frekuensi Kontrol pada Sistem Hybrid Wind-Diesel Menggunakan PID Kontroler Berbasis ACO dan MFA,” J. Rekayasa Mesin, vol. 9, no. 1, pp. 65–68, May 2018, doi: 10.21776/ub.jrm.2018.009.01.10.
M. Ali and A. Suhadak, “Optimisasi Steering Control Mobil Listrik Auto-Pilot Menggunakan Metode Firefly Algorithm (FA),” Semnasinotek 2017, UN PGRI, Kediri, pp. 61–68, 2017.
Muhammad Agil Haikal, Dandy Tulus Herlambang, Machrus Ali, and Muhlasin, “Desain Optimasi PID Controller Pada Heating Furnace Temperature Menggunakan Metode Particle Swarm Optimization (PSO),” ALINIER J. Artif. Intell. Appl., vol. 2, no. 2, pp. 77–82, Nov. 2021, doi: 10.36040/alinier.v2i2.5162.
Machrus Ali, H. Nurohmah, Rukslin, Dwi Ajiatmo, and M Agil Haikal, “Hybrid Design Optimization of Heating Furnace Temperature using ANFIS-PSO,” J. FORTEI-JEERI, vol. 1, no. 2, pp. 35–42, Dec. 2020, doi: 10.46962/forteijeeri.v1i2.21.
M. Hasib Al Isbilly, Markhaban Siswanto, and Machrus Ali, “Optimasi PID Kontroller Pada Sistem Pengaturan Irigasi Menggunakan Metode Bat Algorithm,” J. JEETech, vol. 3, no. 2, pp. 78–83, Oct. 2022, doi: 10.48056/jeetech.v3i2.198.
Hidayatul Nurohmah, M. Ali, Rukslin, Dwi Ajiatmo, and Muhammad Agil Haikal, “Komparasi PID, FLC, dan ANFIS sebagai Kontroller Dual Axis Tracking Photovoltaic berbasis Bat Algorithm,” J. JEETech, vol. 3, no. 2, pp. 71–77, Sep. 2022, doi: 10.48056/jeetech.v3i2.197.
M. Ibrahim, D. Ramadhan, and M. Ali, “Optimasi Kontroler Putaran Motor Permanent Magnet Syschronous Machine ( PMSM ) menggunakan PSO-ANFIS ( Studi Kasus di Perumdam Tirta Kencana ),” Jurna; El-Sains, vol. 2, 2020.
Muhlasin, Budiman, M. Ali, A. Parwanti, A. A. Firdaus, and Iswinarti, “Optimization of Water Level Control Systems Using ANFIS and Fuzzy-PID Model,” in 2020 Third International Conference on Vocational Education and Electrical Engineering (ICVEE), IEEE, Oct. 2020, pp. 1–5. doi: 10.1109/ICVEE50212.2020.9243229.
M. R. Djalal, M. Ali, H. Nurohmah, and D. Ajiatmo, “Aplikasi Algoritma Differential Evolution untuk Desain Optimal Load Frequency Control pada Pembangkit Listrik Tenaga Hibrid Angin dan Diesel,” J. Teknol. Inf. dan Ilmu Komput., vol. 5, no. 5, p. 511, 2018, doi: 10.25126/jtiik.201855430.
M. Ali and M. Muhlasin, “Kontrol Kecepatan Putaran Permanent Magnet Synchronous Machine (PMSM) Menggunakan PID, FLC Dan ANFIS,” J. Elektro, vol. 4, no. 1, p. 253, Apr. 2019, doi: 10.30736/je.v4i1.302.
M. Ali, T. Fahmi, D. W. Khaidir, and H. Nurohmah, “Optimizing Single Axis Tracking for Bat Algorithm-based Solar Cell,” J. FESPE, vol. 2, no. 2, pp. 1–5, 2020.
M. Ali, A. N. Afandi, A. Parwati, R. Hidayat, and C. Hasyim, “DESIGN OF WATER LEVEL CONTROL SYSTEMS USING PID AND ANFIS BASED ON FIREFLY ALGORITHM,” JEEMECS (Journal Electr. Eng. Mechatron. Comput. Sci., vol. 2, no. 1, Feb. 2019, doi: 10.26905/jeemecs.v2i1.2804.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Febrian Rizal Anas, Dwi Ajiatmo, Hidayatul Nurohmah, Machrus Ali
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
