Simulasi Rancang Bangun Aplikasi Rumah Cerdas Berbasis Delphi
DOI:
https://doi.org/10.32492/nucleus.v1i1.1101Keywords:
Smart Home, Microcontroller, Simulation, SoftwareAbstract
Human life is growing rapidly from the residential environment to the industrial environment. One of the technological developments is the control system, so that everything is made easy and practical that can be monitored and controlled from the monitor layer or remotely. One example of the application of a control system in everyday life is a smart home that can regulate electronic equipment and monitor the condition of the house both wired and wirelessly. A smart home system is a combination of several systems between technology and services in a residential environment that serves to increase efficiency , security, and comfort for the occupants of the house. In general, a smart home system consists of several devices such as control, monitoring and automation of several electronic devices that can be accessed via a smartphone or computer layer. OFF can work. For the above experiment, it has worked well, temperature and humidity data can appear periodically and the ON/OFF button has also functioned properly to adjust the LED. If an error occurs in the simulation, it is expected to close the application via the task manager and recheck the program. for further research, if this is implemented in homes, the wiring can be tidied up so it doesn't fall apart. To connect from the application to the microcontroller please use USB TTL as serial communication.
References
H. Diatagirma, “Rancang Bangun Miniatur Alat Pengendalian Peralatan Listrik pada Rumah Tinggal Berbasis Internet of Things (IoT),” J. Online Mhs. Bid. Tek. Elektro, vol. 1, no. 1, pp. 1–13, 2019.
A. Fahmi, A. Finawan, and Muhaimin, “Rancang bangun sistem pengendali rumah cerdas dengan informasi umpan balik berbasis Internet Of Things,” J. Tek. Eletro Politek. Negeri Lhokseumawe, vol. 3, no. 1, pp. 1–7, 2019.
F. Al Rizqi, S. W. Jadmiko, and S. Sunarto, “Rancang Bangun Pengendali Pintu Garasi Otomatis Berbasis Arduino Melalui Aplikasi Smartphone,” Pros. Ind. Res. Work. Natl. Semin., vol. 12, pp. 85–89, 2021.
Nurus Sholeh, Koko Joni, and Miftachul Ulum, “Sistem Monitoring Kondisi Kendaraan Motor Injeksi Berbasis Mikrokontroler,” J. JEETech, vol. 1, no. 1, pp. 37–42, Apr. 2020, doi: 10.48056/jeetech.v1i1.6.
D. A. Silalahi et al., “Pengendalian Kecepatan Putar ( Rpm ) Motor Dc Dengan Metode Pid Berbasis Mikrokontroller Atmega328 Menggunakan Bahasa Pemrograman Code Vision Avr Pengendalian Kecepatan Putar ( Rpm ) Motor Dc Atmega328 Menggunakan Bahasa Pemrograman,” 2017.
A. Nurkholis, Y. Anggela, and A. F. Octaviansyah P, “Web-Based Geographic Information System for Lampung Gift Store,” J. Teknoinfo, vol. 16, no. 1, p. 34, 2022, doi: 10.33365/jti.v16i1.1486.
S. Motahhir et al., “Modeling of Photovoltaic Panel by using Proteus To cite this version : J estr,” pp. 1–8, 2017.
A. Fauzan, “Simulasi Proteus Atap Stadion Automatic Berbasis Arduino Dengan Menggunakan Sensor Hujan Dan Sensor LDR,” J. JEETech, vol. 2, no. 2, pp. 84–90, Dec. 2021, doi: 10.48056/jeetech.v2i2.173.
Machrus Ali, Dwi Ajiatmo, and Muhlasin, “Optimasi Kualitas Tenaga Listrik Di Area Banyuwangi Menggunakan Radio Gateway Over Internet Protocol,” J. JEETech, vol. 1, no. 2, pp. 70–77, Nov. 2020, doi: 10.48056/jeetech.v1i2.3.
M. Ali, A. Raikhani, B. Budiman, and H. Sopian, “Algoritma Persaingan Imperialis Sebagai Optimasi Kontroler PID dan ANFIS Pada Mesin Sinkron Magnet Permanen,” JEEE-U (Journal Electr. Electron. Eng., vol. 3, no. 1, pp. 57–81, Apr. 2019, doi: 10.21070/jeee-u.v3i1.2023.
M. R. Djalal, M. Ali, H. Nurohmah, and D. Ajiatmo, “Aplikasi Algoritma Differential Evolution untuk Desain Optimal Load Frequency Control pada Pembangkit Listrik Tenaga Hibrid Angin dan Diesel,” J. Teknol. Inf. dan Ilmu Komput., vol. 5, no. 5, p. 511, 2018, doi: 10.25126/jtiik.201855430.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
