Flexural and Microstructural Behavior of Reinforced Concrete Beams Using River and Beach Sand Aggregates
DOI:
https://doi.org/10.32492/nucleus.v5i1.5115Keywords:
Reinforced concrete beam, Beach sand, River sand, Flexural strength, Compressive strengthAbstract
This study investigates the influence of river sand and beach sand as fine aggregates on the flexural behavior, mechanical properties, and microstructural characteristics of reinforced concrete beams. The increasing scarcity of river sand and environmental concerns associated with excessive mining have encouraged the exploration of alternative fine aggregates such as beach sand. However, the high chloride content and different particle characteristics of beach sand may affect concrete performance and durability. In this research, reinforced concrete beams were experimentally evaluated using two types of fine aggregates and two reinforcement configurations, namely plain and deformed reinforcement bars. The experimental program included compressive strength testing, flexural testing under two-point loading, water absorption testing, porosity analysis, and microstructural characterization using Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD). The results showed that concrete containing river sand exhibited higher compressive strength and lower porosity compared to concrete containing beach sand. The average compressive strength of river sand concrete reached 24.85 MPa, while beach sand concrete achieved 17.69 MPa. Flexural testing indicated that beams reinforced with deformed bars demonstrated better performance than beams with plain reinforcement. SEM observations revealed that beach sand concrete possessed a more porous microstructure and weaker interfacial transition zones, while XRD analysis confirmed that the primary hydration products remained similar for both concrete types. Overall, beach sand has potential as an alternative fine aggregate, although additional treatment and quality control are required to improve its mechanical and durability performance.
References
I. S. Hilal and G. M. Idroes, “Top global concrete-producing countries: A hierarchical cluster analysis of concrete production, CO₂ emissions, and economic growth,” HJAS, vol. 3, no. 2, pp. 94–105, 2025, doi: 10.60084/hjas.v3i2.314.
B. Arulmoly and C. Konthesingha, “Pertinence of alternative fine aggregates for concrete and mortar: A brief review on river sand substitutions,” Australian Journal of Civil Engineering, vol. 20, no. 2, pp. 272–307, 2022, doi: 10.1080/14488353.2021.1971596.
G. O. Bamigboye, U. E. Okechukwu, D. O. Olukanni, D. E. Bassey, U. E. Okorie, J. Adebesin, and K. J. Jolayemi, “Effective economic combination of waste seashell and river sand as fine aggregate in green concrete,” Sustainability, vol. 14, p. 12822, 2022, doi: 10.3390/su141912822.
M. Mahadevappa, R. S. G. Krupa, S. K. Ahmed, and R. K. Shetty, “Flexural performance of reinforced concrete beam made with waste foundry sand as fine aggregate,” International Journal of Structural Integrity, vol. 12, no. 5, pp. 715–728, 2021, doi: 10.1108/IJSI-07-2021-0066.
H. Tran, T. Nguyen-Thoi, and H.-B. Dinh, “State-of-the-art review of studies on the flexural behavior and design of FRP-reinforced concrete beams,” Materials, vol. 18, p. 3295, 2025, doi: 10.3390/ma18143295.
V. Chakrawarthi et al., “Effect of design parameters on the flexural strength of reinforced concrete sandwich beams,” Crystals, vol. 12, p. 1021, 2022, doi: 10.3390/cryst12081021.
M. A. Shayanfar and H. Shahrabadi, “Investigating the effects of recycled plastic as fibers on bending behavior of green concrete beams exposed to marine environment,” Materials, vol. 16, p. 5912, 2023, doi: 10.3390/ma16175912.
I. S. Ignjatović, S. B. Marinković, Z. M. Mišković, et al., “Flexural behavior of reinforced recycled aggregate concrete beams under short-term loading,” Materials and Structures, vol. 46, pp. 1045–1059, 2013, doi: 10.1617/s11527-012-9952-9.
A. Abushanab and W. Alnahhal, “Flexural behavior of reinforced concrete beams prepared with treated wastewater, recycled concrete aggregates, and fly ash,” Structures, vol. 45, pp. 2067–2079, 2022, doi: 10.1016/j.istruc.2022.10.029.
N. Kachouh, H. El-Hassan, and T. El-Maaddawy, “Influence of steel fibers on the flexural performance of concrete incorporating recycled concrete aggregates and dune sand,” Journal of Sustainable Cement-Based Materials, vol. 10, no. 3, pp. 165–192, 2021, doi: 10.1080/21650373.2020.1809546.
I. Aghajanzadeh et al., “Seawater-mixed concrete – A review with focus on durability properties,” Applied Ocean Research, vol. 166, p. 104878, 2026, doi: 10.1016/j.apor.2025.104878.
D. Pan et al., “Study of the influence of seawater and sea sand on the mechanical and microstructural properties of concrete,” Journal of Building Engineering, vol. 42, p. 103006, 2021, doi: 10.1016/j.jobe.2021.103006.
J. Wei et al., “Effect of replacing freshwater river-sand with seawater sea-sand on dynamic compressive mechanical properties of concrete,” Construction and Building Materials, vol. 419, p. 135473, 2024, doi: 10.1016/j.conbuildmat.2024.135473.
B. M. S. Gopinatha et al., “Incorporating sea sand into self-compacting concrete: A systematic review,” Discover Applied Sciences, 2024, doi: 10.1007/s42452-024-05826-0.
Y. Huang et al., “Incorporating supplementary cementitious materials into ultra-high-performance seawater sea-sand concrete (UHPSSC): Hydration, microstructure, and mechanical performance,” Construction and Building Materials, vol. 472, p. 140824, 2025, doi: 10.1016/j.conbuildmat.2025.140824.
Z. Chen et al., “Flexural performance of steel bar reinforced sea sand concrete beams exposed to tidal environment,” Applied Sciences, vol. 12, no. 23, p. 12321, 2022, doi: 10.3390/app122312321.
K. Ganesan, V. Kanagarajan, and J. R. J. Dominic, “Investigation on corrosion and flexural behaviour of reinforced concrete using marine sand,” Jurnal Teknologi, vol. 87, no. 1, pp. 189–202, 2025, doi: 10.11113/jurnalteknologi.v87.22209.
H. Abd et al., “A study of chloride binding capacity of concrete containing supplementary cementitious materials,” Scientific Reports, pp. 1–20, 2024, doi: 10.1038/s41598-024-62778-6.
Y. Hua, S. Yin, and L. Feng, “Bearing behavior and serviceability evaluation of seawater sea-sand concrete beams reinforced with BFRP bars,” Construction and Building Materials, vol. 243, p. 118294, 2020, doi: 10.1016/j.conbuildmat.2020.118294.
F. Yuan et al., “Flexural behavior of seawater sea-sand coral aggregate concrete beams reinforced with FRP bars,” Journal of Composites for Construction, vol. 26, no. 6, 2022, doi: 10.1061/(ASCE)CC.1943-5614.0001264.
Z. Dong et al., “Bond and flexural performance of basalt fiber–reinforced polymer bar–reinforced seawater sea sand glass aggregate concrete beams,” Advances in Structural Engineering, vol. 24, no. 15, 2021, doi: 10.1177/136943322110262.
Z. Chen et al., “Flexural behavior of GFRP bars reinforced seawater sea sand concrete beams exposed to marine environment: Experimental and numerical study,” Construction and Building Materials, vol. 349, p. 128784, 2022, doi: 10.1016/j.conbuildmat.2022.128784.
F. Ren et al., “Flexural behavior and modelling of FRP-bar reinforced seawater sea sand concrete beams,” Construction and Building Materials, vol. 309, p. 125071, 2021, doi: 10.1016/j.conbuildmat.2021.125071.
F. Yuan et al., “Experimental investigations on flexural behavior of compression-cast seawater sea-sand concrete beams reinforced with CFRP bars,” Construction and Building Materials, vol. 445, p. 137754, 2024, doi: 10.1016/j.conbuildmat.2024.137754.
C. Su et al., “Experimental study on seismic behavior of seawater sea sand concrete beams reinforced with steel-FRP composite bars,” Engineering Structures, vol. 248, p. 113269, 2021, doi: 10.1016/j.engstruct.2021.113269.
J. Zhou et al., “Experimental study on flexural behavior and balanced reinforcement ratio of CFRP-steel composite bars reinforced coral sea-sand aggregate seawater concrete beams,” Case Studies in Construction Materials, vol. 23, p. e05374, 2025, doi: 10.1016/j.cscm.2025.e05374.
Z. Dong et al., “Flexural behavior of seawater sea-sand coral concrete–UHPC composite beams reinforced with BFRP bars,” Construction and Building Materials, vol. 265, p. 120279, 2020, doi: 10.1016/j.conbuildmat.2020.120279.
Y. Yang et al., “Flexural and compressive performance of BFRP-reinforced geopolymer sea-sand concrete beams and columns,” Composite Structures, vol. 318, p. 117089, 2023, doi: 10.1016/j.compstruct.2023.117089.
B. Zhang et al., “BFRP bars reinforced geopolymer-based coral aggregate concrete beams,” Engineering Structures, vol. 330, p. 119910, 2025, doi: 10.1016/j.engstruct.2025.119910.
X. Xue et al., “Flexural behavior of seawater sea-sand concrete short beams reinforced with bamboo sheet,” Journal of Building Engineering, vol. 76, p. 107274, 2023, doi: 10.1016/j.jobe.2023.107274.
Z. Chen et al., “Experimental study on flexural behavior of corrosion-resistant aluminum alloy coral sea-sand seawater concrete composite beams,” Engineering Structures, vol. 326, p. 119555, 2025, doi: 10.1016/j.engstruct.2024.119555.
L. Wang et al., “Flexural behavior of BFRP reinforced seawater sea-sand concrete beams with textile reinforced ECC tension zone cover,” Construction and Building Materials, vol. 278, p. 122372, 2021, doi: 10.1016/j.conbuildmat.2021.122372.
S. Zhang et al., “Flexural behavior of seawater-mixed steel fiber reinforced concrete,” Construction and Building Materials, vol. 373, p. 130858, 2023, doi: 10.1016/j.conbuildmat.2023.130858.
Y. Zhou et al., “Ductile, durable, and reliable alternative to FRP bars for reinforcing seawater sea-sand recycled concrete beams,” Construction and Building Materials, vol. 269, p. 121264, 2021, doi: 10.1016/j.conbuildmat.2020.121264.
F. Mukhtar, “Simulation of fracture behavior in seawater and sea-sand mixed recycled concrete,” Theoretical and Applied Fracture Mechanics, vol. 131, p. 104413, 2024, doi: 10.1016/j.tafmec.2024.104413.
X. Hu et al., “Evaluation of cracking and deflection of GFRP bar reinforced recycled concrete beams,” Journal of Building Engineering, vol. 80, p. 108092, 2023, doi: 10.1016/j.jobe.2023.108092.
S. Supunsala et al., “Application of biochar in concrete – A review,” Cement and Concrete Composites, vol. 143, p. 105204, 2023, doi: 10.1016/j.cemconcomp.2023.105204.
L. Evangelista and J. de Brito, “Flexural behaviour of reinforced concrete beams made with fine recycled concrete aggregates,” KSCE Journal of Civil Engineering, vol. 21, no. 1, pp. 353–363, 2017, doi: 10.1007/s12205-016-0653-8.
X. Liang and S. Yin, “Flexural durability of seawater coral aggregate concrete beams reinforced with basalt FRP bars,” Journal of Composites for Construction, vol. 26, no. 2, 2022, doi: 10.1061/(ASCE)CC.1943-5614.000120.
X. Wu et al., “Construction and field tests of jointed reinforced concrete pavement made of sea sand concrete and GFRP reinforcement,” Case Studies in Construction Materials, vol. 23, p. e04974, 2025, doi: 10.1016/j.cscm.2025.e04974.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Nucleus Journal
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
